The soles will be the first part of your shoes to wear out because they hurt the most. Continuous contact with the rugged terrain speeds up the deterioration.
If you still want to stick with your favorite footwear, changing the sole will help upgrade their appearance. Unfortunately, this job is not possible for all shoes.
What kind of shoes can be resoled? How to resole them properly? When it’s time to renew your footwear, check this post.
We have everything you need for the upgrade!
The sole construction determines if you can resole your shoes. There you go if the footwear has Goodyear, Blake-Rapid, Bologna, or similar stitching styles.
You can resole Goodyear welt footwear with exposed stitching around the sole.
Expect little if you buy cheap shoes because there is a higher probability that the manufacturer glued them.
The Goodyear welt is a long, narrow leather band that runs between the outsole and the upper of a shoe.
Shoe manufacturers make the shoe easy to resole and nearly waterproof by gluing the welt to the upper and then sewing it to the outsole.
So, you can’t resole every pair of shoes. The footwear’s construction and design determine whether you can perform this task.
Low-quality models don’t have spare soles included. Even if they have, the cost of replacing the sole may be higher than the cost of the shoes.
Aside from the Goodyear, you can resole your shoes if they have one of the following stitching styles.
The Blake-Rapid technique integrates the Goodyear and Blake procedures by fusing the Blake method’s with the Goodyear method’s additional midsole.
Because of the extra midsole, shoes made using this technology are typically robust. Hence, this technique is perfect for making tough shoes.
Makers create their Blake-Rapid shoes by stitching the midsole along the bottom of the insole to give a solid platform for the shoe outsole.
Then, they stitch the outsole to the pre-made shoe. As you can see, this technique allows users to detach the sole and replace it with a new one easily.
This method makes the shoes more durable and water-resistant than the Blake method only. However, Blake shoes will be cheaper and more flexible to resole.
Wearing a Bologna shoe makes you feel like soft leather is wrapping around your feet. It means that your feet don’t contact the sole directly.
This method is similar to the Blake, but the stitches are closer to the sole edges, and your feet don’t feel it.
High-quality leather boots frequently have soles finished with a Blake stitch.
Even though the majority of its work stays concealed underfoot, it has grown to be one of the most recognizable sole structures.
The Blake sole uses numerous types of glue and a row of stitching that joins the upper sole to the inner sole and back to the sole.
To feel the stitches, you can run your fingers from inside your shoe along the bottom section of the inner sole.
This type of construction has the upper wrapped around the insole. Plus, the stitch will go twice through them. The double seam enhances the resistance and comfort in your shoes.
The running surface edge of the shoe is where you can find the strap. This method aims to stitch the insole and upper while providing a flat band around your shoe to join the sole.
Veldtschoen is a kind of Goodyear welting construction. Before attaching the upper, shoemakers welt the lining to the insole bridge or edge. Then, they place the upper on the welts and stitch it onto the midsole.
This construction style has many things in common with Goodyear welting. However, the makers stitch the upper down under the welt in this case.
The welt generally has two or three rows of braid stitching, giving it a distinctive appearance.
The stitch-down construction sews the upper to the midsole or sole without using a welt. It fastens to the midsole with the help of the upper leather.
First, you must buy heels-equipped soles (whole or partial) from a shoemaker.
Make sure to get a sole that is the same size as your footwear because soles come in several sizes.
The detailed instructions for resoling your shoes are as follows:
Remove any dirt, mud, and grease from your worn-out shoe bottoms by scrubbing them. If you intend to wash your footwear with soap and water, wait until they are dry before resoling.
Cut the heel’s stitching with a sharp blade when your shoes have dried out. You can also pry the sole apart.
If you are working with tough materials, like leather and rubber sole, pliers and pincers will help you with your cutting leverage. You can also use a nail punch and hammer to avoid injuries.
Once the old sole is off, check both sides of your shoe. There are three layers to deal with: outer, midsole, and inner. You need to detach all three.
A cutter can help cut through the three layers effortlessly, but remember to peel the upper sole as much as possible.
After peeling that layer, remove it with a drill. Start with a small drill and apply some pressure to remove it with a screwdriver. When you finish cutting the stitching, you can remove the outsole easily.
After detaching the outsole, you can easily separate the midsole from your shoe. It’s where you attach the new sole.
Trim the midsole with a sharp blade. Then, estimate how much fabric you will remove. There should be enough space for the new sole, but you have to be careful not to tear your shoe.
Attach the replacement sole after you have leveled your midsole. This step speeds up the resoling process. You can also use a punch or hammer to stretch the outsole if necessary.
Ensure you face the same direction as the pattern of the soles when you insert the new outsole into the midsole. By doing this, you can extend the lifespan of your shoe.
Check that the top of the shoe is where the tread patterns on each side of the new soles intersect (where stitching usually takes place). It’s how the factory originally soled your shoes.
To avoid accidentally gluing it shut, you should tape the place where two new soles meet before you start. Gently apply a thin coat to both surfaces following the contact cement’s directions (a water-based solution is ideal for this project).
While waiting for the glue to dry partially, you might want to place some newspaper or cartons under the shoes.
After fully coating both surfaces, attach them together and check that everything is in good condition before putting any weight on the shoe.
You should stitch down the new soles as soon as they have properly dried to maintain their shape. To keep the outsole tied to your midsole, you will need some holes on it to offer a strong point of fusion between the two layers.
Choose a durable thread to stitch the soles. Your shoe should stay together, and super glue is what you want to achieve this effect. The adhesive also makes it easier to handle heavy-duty needles.
You won’t have to apply the glue many times using an extra-strong thread. The thread should be about one foot long so you can easily stitch through the holes.
When you have finished the entire shoe, tie a knot on one end. Remember to leave it there before tying a knot on the opposite side. This tip lessens the possibility of thread loss while in use.
Now, line the interior of your shoe with wax paper. Slip the thread through the opposite stitching hole on the outsole while drawing it up from one hole on the midsole.
Tie a knot on each thread so that it won’t withdraw, and then lower it through the opposing stitching hole in the midsole with the ends pointing in the opposite directions.
Trim any excess thread until there is about one inch and a half of thread left between the layers.
Whipstitch the two sections together using your needle. You should go through both pieces of cloth for extra support.
Once you have completed the whole circle of the shoe, use super glue to seal the hole and knot off the thread on both sides. There should be two extra inches of thread so you can get it through.
Allow the soles to dry for one hour, and you can use your shoe.
You should replace the soles when your shoes start to malfunction. Your safety is at risk, even from a tiny crack between the heel and top of the footwear.
The type of use you expose your footwear to and the make will determine how long you can go before having to resole it. The following signs can generally tell if it’s time for the replacement.
Holes on the sole are apparent signs of damaged shoes. Sometimes, they indicate that you have already broken them down and can’t repair them.
The outsole contacts the ground the most. It’s in charge of protecting the fragile interior of your shoes. Once the exterior damage attacks the interior, you will be in big trouble.
When you notice holes in the sole, replace it as soon as possible. The bigger the soles, the worse the interior will suffer.
One of the benefits of having high-quality shoes is feeling how your footwear adapts to your movements. Everyone moves differently. Uneven wear, though, is something to be careful about.
Even though discovering that you are stepping on the outside of your foot might be funny, this type of uneven wear is problematic for the wearer.
If not addressed, the uneven wear could worsen your strange movement and cause problems with your calves and ankles. It calls for another sole.
It’s necessary to resole your footwear if the uppers begin to separate from the midsole. Even if you quickly put your shoes on and discover a little split, you should probably fix it before leaving your house.
Give your shoes a new sole if you notice that the pavement feels much closer to your feet than usual. Even if it’s difficult to see, you should feel this difference in your footwear.
Try pressing a finger to the footwear’s sole to check. You need to have a resole if the sole seems spongy immediately.
When the sole gets thinner, there will be holes in it. We have discussed this issue before, which requires you to resole your footwear.
Typically, you can resole your shoes about three times. Multiple factors, such as how often you wear them and the sole construction of your footwear, will affect how often you can resole your footwear.
One pair of soles equals around 1,825 miles, for example, if you walk three miles every day, five days per week, in your footwear.
Typically, resoling shoes should have the following features:
- A toe box with triple stitching that is more resistant to external harm than other sections
- A strong, tear- and rip-resistant upper composed of durable material
- A stitch pattern with stronger thread and rows of stitching
- Resolable outsoles
- Shock absorbency features in the cushions under the heel
You will notice how a closed-cell cushion offers outstanding value. Tests reveal that most of these outsoles may last about 1,000 miles or more before they need replacement.
Users who wear shoes with replaceable outsoles express their surprise at how long the outsoles last long. The greatest part is that you just need to replace the outsole and retain the other parts.
No matter how many you wear your beloved shoes, you can feel at ease knowing that by changing the outsole, they will once again protect your feet for years.
You may not need a complete shoe resole. What are the differences between replacing a full shoe sole and just a part of a sole?
A half-sole replacement is simple, affordable, and ideal for people who enjoy wearing their shoes abrasively. They don’t mind if their shoes wear out after a few months because they like to switch things up occasionally.
On the other hand, a full sole repair involves completely removing the worn-out sole and inserting a new one. It’s lengthy, sometimes difficult work that requires excellent skills and patience.
However, if you choose to replace the sole completely, the new sole will provide a long-lasting solution to your shoes.
This comparison table will help you compare half-sole vs. full-sole replacement side by side.
|Criteria||Half-Sole Resole||Full Sole Resole|
|Difficulty level||Easy and quick||Skills needed|
|Sole condition||Suitable for medium damage||Suitable for severe damage|
|Pros||You can resole your shoes at a lower cost.||Full-sole replacement renews the life of your shoes and restores their original functionality.|
|Cons||The remaining old sole material that can cause the shoe and your feet to slide around. Hence, the footwear will wear out more quickly.||It’s a lengthy, tedious job. Sometimes, you need an expert to perform the task properly.|
|Best For||Those who wear footwear and want to change the sole occasionally||– Shoes that break down slowly
– Those who want a long-lasting solution for their footwear
– Skiers and those who work in wet conditions
You can learn about the differences between the two techniques from this video:
You can use specialized shoe adhesive to repair small tears in the soles.
Compared to buying new footwear, shoe glue is a much more cost-effective option, costing less than $8.
You can only repair the heels of your footwear if they suffer damage only to the heels. Depending on the material of the shoe, fixing and replacing the heel of a high-heeled shoe can cost anywhere from $10 and $40.
Prices to sole shoes can range widely, from around $10 to $60, depending on the brand, material, and quality.
You would normally pay at least $15 or more for a sole protector, yet there are several less-priced choices.
Yes. By following our detailed instructions, you can even replace the soles of your shoes by yourself. However, there are some things to consider before carrying out the project:
- You can’t resole all the shoes. If you want to, check the construction of the sole
- Use the right tool and be careful not to damage your shoe
- Buy the right sole for your shoe
You should consider multiple things to determine if resolving your shoes is worth it.
- Cost: A minor repair costs $10 to $20. If it’s medium-degree damage, you will spend about $30 to $100 to fix it. And if your sole has worn out severely, the shoe repair cost can be up to $150.
- Time: Sending your shoes to the shoe repairer is an easy solution, but you need to wait about two weeks to fix your sole. If you do it yourself, it just takes a few minutes to an hour.
If other parts of your shoes are still in good condition and you can fix the sole, we recommend shoe resoling. However, buying a new pair of shoes will be better if you expect the repair cost to be too high.
Most manufacturers recommend a maximum number of resoles of two to three times. Then, if your shoe is still in good shape, you might still have it resoled.
A sole can work for about 1,800 miles. However, the exact time for replacement depends on several factors. For example, if you wear the shoes repeatedly, they need more frequent sole changes.
It would be best to check for signs of a damaged sole to replace it. For example:
- There are holes or cracks on the sole.
- The sole becomes uneven.
- You accidentally slip while walking, even on smooth terrain.
- The soles split.
- The fabric gets thinner.
Yes. It’s crucial to replace worn-out shoe soles with ones that are of comparable or higher quality than the ones that came with the footwear.
You can tell if your shoes are resoleable by checking their stitching styles. Some models allow wearers to detach the sole easily and replace it with a new one.
Resoling footwear isn’t too complicated. You can do it yourself, but make sure you choose the right sole and follow our outlined steps carefully.
Hopefully, you will find this guide helpful. If you have any questions, please feel free to ask. We will get back to you as soon as possible.
Thank you for reading!